CNCEST 4 Ton Manual Heat Press Machine with Dual Heating Plates - 110V/300W High Pressure Oil Extractor for DIY, Crafting, and Small Business Use

Specifications:Voltage: 110VPower: 300WProduct Size: 192*145*370mm/7.5*5.7*14.5inchWeight:10.5kg/23lbsColor:blackHeating plate size: 101.6*101.6mm /4*4 inchesMaterial: The outer shell is made of iron plate, and the middle heating plate is made of aviation aluminumInstructions for use of KP-4 temperature control meter:1: SV1/SV2 is the set temperature, PV1/PV2 is the actual temperature, 1 is the upper board, and 2 is the lower board.2: Press (▶) to start heating. Voice (The plates start to heat) embossing machine starts heating; Voice (Top plate heating process completed/Bottom plate heating process completed) finishes heating. The heating time is 2-5 minutes, and it takes about 8 minutes to stabilize.3: Press the start button (▶) and the voice (The plates start to heat) starts heating, and then press the start button, and the voice (The heating process is paused) pauses heating.4: The left and right keys <> are the set temperature. Press this key to switch between one, ten and hundreds digits, and press -+ to adjust the digital temperature. While the number is flashing, press the start key (▶) to switch the set temperature of the upper and lower boards.5: Long press the start button (▶) for 5 seconds to turn off the voice, and long press for 5 seconds to turn on the voice.6: Press the -+ key at will to switch between Celsius and Fahrenheit.Package Included:1*Press machine(KP-4)1*Power cable6*Sticker1*Stainless steel dab tool(A)1*box1*User manual10*Baking paper;4*Magnet;1*Timer5*press bag (2*4 72μm)